<?xml version="1.0" encoding="iso-8859-1" standalone="yes" ?>
<rss version="2.0">
<channel>
<title>Flipstar Faq - Offene Fragen</title>
<description>Sammlung von kleinen Howto\'s und Notizen</description>
<link>http://flipstar.net/myfaq</link>	<item>
		<title><![CDATA[Hi! Ich habe ne Frage. Ich versuche seid langer ... (Phil)]]></title>
		<description><![CDATA[Hi!
Ich habe ne Frage. Ich versuche seid langer Zeit Tinky auf meiner NAS2000 zu installieren. Habe die neuste Raidsonic Firmware drauf. Ich erreiche auch per Telnet den Bootloader und habe einen TFTP Server laufen. Wenn ich jetzt die Datei hochladen will per Tftp gebe ich wie beschrieben die Ip des TFTP Servers und die Location der Datei an. Und dann passiert gar nix. Es werden keine Datein gesendet. Es wird auch nix angezeigt in dem Bootloader.
Habe das auf meinem Mac und auch auf einem Windows Rechner ausprobiert.

Gruß

Phil]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_64</link>
		<pubDate>Mon, 12 May 2008 11:55:31 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Geachte Mevrouw, Meneer. Mijn vriend heeft een Dual Hdd ... (H.Scherpenhuizen)]]></title>
		<description><![CDATA[Geachte Mevrouw, Meneer.
Mijn vriend heeft een Dual Hdd Nas gekocht via Ebay en wilde graag twee Hdd`s van 500gb
gebruiken,doch dit werkte niet. Hij heeft toen op internet gekeken en heeft gelezen dat je de firmware moest updaten. Hij heeft de nieuwe firmware ge-download en heeft gedaan wat in de manual stond. Halverwege
stopte het flashen en deed de Nas helemaal niets meer. Na ongeveer een uur heeft hij de Nas uitgezet want er gebeurde helemaal niets meer, nadien is er niet meer in te komen op geen enkele manier. Nu heeft mijn vriend een artikel gelezen van iemand die spoedig zou vertellen stap voor stap hoe je de Nas weer tot leven brengt op de site van Haukap.net. Wij hopen dat u ons hiermee kan helpen om de Nas weer tot leven te brengen. Bij voorbaat onze dank.]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_63</link>
		<pubDate>Mon, 05 May 2008 20:55:00 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hallo zusammen, ich habe eine ICY-Box 4220. würde da ... (René)]]></title>
		<description><![CDATA[Hallo zusammen, ich habe eine ICY-Box 4220.

würde da gerne einen mailserver draufhaben, geht das irgendwie?

gruß René]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_62</link>
		<pubDate>Wed, 05 Mar 2008 10:08:39 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hallo Flip Die Tinkyfirmware (NAS-1000)ist echt gut. Aber jetzt ... (Pietro)]]></title>
		<description><![CDATA[Hallo Flip
Die Tinkyfirmware (NAS-1000)ist echt gut. Aber jetzt habe ich ein Problem: Ich habe die Disk verschlüsselt, und jetzt kann ich nicht mehr drauf zugreifen, auch nicht auf die Adminwebseite. Hab ich da was falsch gemacht?
Vielen Dank schon zum voraus
Gruss Pietro]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_61</link>
		<pubDate>Sun, 30 Dec 2007 17:07:28 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hallo, Seit der neuen RaidSonic FW ist das NAS ... (Peter)]]></title>
		<description><![CDATA[Hallo,
Seit der neuen RaidSonic FW ist das NAS (NAS-1000B) ja auch RAID fähig, zumindest gibt'S jetzt die möglichkeit.
Tests mit einer 60GB und einer 80GB Platte haben auch ganz gut funktioniert.
Nur meine 2 320GB Platten (selbes Modell) wollen nicht so recht. man kann zwar das RAID1 (RAID0 kann man nicht einstellen) definieren, aber nach dem Reboot kommt nur noch die Login-Maske und mehr nicht...
Hat schon jemand die RAID Funktion getestet?
Kann man die vielleicht sogar per TelNet einstellen (inkl. RAID0 vielleicht)? Wenn ja wie?
Woran könnte es liegen?
Danke!

mfg
Peter]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_60</link>
		<pubDate>Thu, 20 Dec 2007 10:13:12 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hallo, ich habe seit gestern ein dual nas von ... (Sebastian Ziegler)]]></title>
		<description><![CDATA[Hallo,

ich habe seit gestern ein dual nas von pyrogate und bin am verzweifeln. habe mir heute das tinky drauf gemacht und bekomme seither keine raidfunktion. der erste ide anschluss ist praktisch aus. ich habe versucht wieder auf die ursprüngliche firmware downzugraden, erhielt hier aber nur eine mischung aus beiden webinterfacen. wie bekomme ich die raidgeschichte unter tinky zum laufen oder wie komme ich wieder auf die originalfirmware. per webinterface macht dies nur probleme und und per ssh weiß ich nicht wirklich welche images ich nehmen soll.
danke für die hilfe, wirklich wichtig.

gruß
sebastian]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_59</link>
		<pubDate>Tue, 11 Dec 2007 20:48:37 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[hi there, wouldn't it be nice to install a ... (klabauder)]]></title>
		<description><![CDATA[hi there,
wouldn't it be nice to install a tinky-board on nas-2000.org?
i think there ist much more potential in this nas and a board would help spreading and improves understanding for noobs.
greetz klabauder]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_58</link>
		<pubDate>Thu, 22 Nov 2007 14:07:58 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hallo zusammen, habe seit kurzem eine ICYBox NAS2000 mit ... (mapasa)]]></title>
		<description><![CDATA[Hallo zusammen,
habe seit kurzem eine ICYBox NAS2000 mit 
Firmware Version   1.3.3.IB.1.beta.2 (Nov. 7, 2006) 
Hardware Version   Rev. B 
Ich suche jemanden der mir zuverlässig gegen eine Aufwandsentschädigung die aktuelle Firmware auf dem Gerät installiert. Ich habe zwar ein Kabel angefordert, glaube aber nicht dass dies jemals auftaucht.
Ich würde das Gerät gerne vorbeibringen und dann wieder mitnehmen... Umkreis 150 Km um 35390 Gießen
Danke Euch
]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_57</link>
		<pubDate>Sat, 27 Oct 2007 05:59:20 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hy, I succesfully flashed my nas 1000 with tinky ... (Cid 54)]]></title>
		<description><![CDATA[Hy,

I succesfully flashed my nas 1000 with tinky firmware and everything works great. But my ftp transfer speed is low (never more then 3 Mb/s). Is this normal or should it be higher?]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_56</link>
		<pubDate>Wed, 24 Oct 2007 05:44:03 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hi, is it possible to upload data via internet ... (Patrick)]]></title>
		<description><![CDATA[Hi,

is it possible to upload data via internet by using ftp over the NAS-2000? And how?

tnx]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_55</link>
		<pubDate>Fri, 05 Oct 2007 14:56:07 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hi, is it possible to upload data via internet ... (Patrick)]]></title>
		<description><![CDATA[Hi,

is it possible to upload data via internet by using ftp over the NAS-2000? And how?

tnx]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_54</link>
		<pubDate>Sun, 30 Sep 2007 22:13:21 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hallo zusammen, habe gestern auch versuch meine icy box ... (casy)]]></title>
		<description><![CDATA[Hallo zusammen,
habe gestern auch versuch meine icy box nas 2000 mit der tinky soft zu "versehen". Hatte die firmware 2.x druff, ergo nur die ramdisk und application geflasht. leider geht nun garnix mehr. Kann weder den bootloader erreichen, noch sonstiges. nas fähr hoch, kann es aber auch nicht per web gui oder SearchNas Proggi finden.
Bitte um rasche Hilfe !
]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_53</link>
		<pubDate>Sun, 30 Sep 2007 08:35:37 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Ich habe ein NAS1000 gekauft. Läuft mit einer 250GB-Platte ... (Pietro)]]></title>
		<description><![CDATA[Ich habe ein NAS1000 gekauft. Läuft mit einer 250GB-Platte einwandfrei. Aber mit einer Hitachi 500GB-Platte läuft USB nur mit 1-2MB/sec, Netzwerk i.O. Die Platte ist i.O., denn in einem anderen NAS läuft sie einwandfrei. Ich habe die neueste Firmware von Raidsonic, und ich habe schon das IDE-Kabel getauscht. Leider ohne Erfolg. Wer weiss Rat? Vielen Dank schon mal.
Pietro]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_52</link>
		<pubDate>Thu, 27 Sep 2007 08:34:46 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[I connected a 2nd HDD to the system (NAS1000). ... (Frank)]]></title>
		<description><![CDATA[I connected a 2nd HDD to the system (NAS1000).
It'S displayd in the discutility, could be formated and was mounted.
Using the original Firmware there is no way to change the mountdir into /mnt/IDE2.
Is this possible with a alternative firmware or could this be done by changing it in the saved configfile and loading it into the box ?
]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_51</link>
		<pubDate>Sun, 23 Sep 2007 18:28:25 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hi! Ich habe gesehen, dass es mal einen Beitrag ... (Sebastian)]]></title>
		<description><![CDATA[Hi! Ich habe gesehen, dass es mal einen Beitrag "ssh zugang mit puTTy" gab! Leider wird dieser zurzeit überarbeitet und steht deshalb nicht zur Verfügung! Gibt es den Artikel noch irgentwo und kann jemand diesen mir zuschicken? Wenn nicht, gibt es  evtl . eine andere Beschreibung wie ich den ssh Server auf die NAS bekomme!]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_49</link>
		<pubDate>Sun, 16 Sep 2007 17:16:27 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hallo, ich habe auf meiner nas2000 die aktuelle tinky ... (Thomas D.)]]></title>
		<description><![CDATA[Hallo,
ich habe auf meiner nas2000 die aktuelle tinky version installiert (Tinky 2_3_2-mu-02.2).
Vorher war auf der BOX eine 1.3.3beta4, diese hab ich zunächst probehalber auf die offizielle 2.3.2 upgedatet. Die Box lief auch soweit.
Mit der Tinky Version habe ich nun vorrangig 2 Probleme.
1. ich kann die MAC-Adresse nicht mehr ändern
 Wenn ich im RedBoot 6 wähle lande ich wieder im Menü. Dort wo sonst steht das es 2 Einträge gibt steht ein sehr großer hex wert, genau weis ich den nicht mehr.
2. Ich komme nicht mehr auf den FTP Server. Bereits die Verbindung wird abgelehnt.
Mfg

Thomas]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_48</link>
		<pubDate>Thu, 13 Sep 2007 13:58:16 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hi, installed Tinky 2.3.2-mu-02. I have two questions. 1 ... (Ivan Boublik)]]></title>
		<description><![CDATA[Hi,
 installed Tinky 2.3.2-mu-02.
I have two questions.
1 - Is possible send email from command line?
2 - Exist any file manger like MC etc.?

Thak you Ivan Boublik]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_46</link>
		<pubDate>Thu, 30 Aug 2007 16:33:08 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hallo zusammen, da ich keine passendere Rubrik gefunden habe, ... (Stephan Brack)]]></title>
		<description><![CDATA[Hallo zusammen, da ich keine passendere Rubrik gefunden habe, stelle ich meine Fragen mal hier. Und zwar geht es mir um das Thema Torrent-Client auf NAS-2000:
1. Reicht die Performance des NAS-2000 überhaupt für einen Torrent-Client aus?
2. Habt Ihr evtl. vor eine neue Firmware mit integriertem Client herauszubringen?
3. Oder läßt sich mit ssh-Zugriff ein Client auf dem NAS-2000 ohne Probleme installieren?
Vielen Dank und Gruß Stephan]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_45</link>
		<pubDate>Wed, 29 Aug 2007 11:40:40 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hallo Flipstar, ist es möglich deine firmware auf das ... (BadRat)]]></title>
		<description><![CDATA[Hallo Flipstar,

ist es möglich deine firmware auf das ib-nas2000 zu bekommen? es läuft aktuell:

System Information 
Hardware Name   IB-NAS 1000 Platform 
Firmware Version   2.3.2.IB.2 
Hardware Version   Rev. B 
Product Vendor   ICY BOX
 
falls ja währe eine info von dir sehr nett:)
viele gruesse BadRat:) 
]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_44</link>
		<pubDate>Sun, 12 Aug 2007 17:39:48 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Not really a question, but because I did not ... (Remco)]]></title>
		<description><![CDATA[Not really a question, but because I did not find a reference to these pages on your sites, I figured you might find this interesting.

The NAS calls itself Centrinas as UPNP device, which lead me to these pages:
http://www.storlinksemi.com/products.htm
http://www.storlinksemi.com/products_centroid.htm
http://www.storlinksemi.com/an3316-04.htm
The screenshot on the last page looks very familiar.

Great info on this site, thanks for your work!

]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_41</link>
		<pubDate>Mon, 16 Jul 2007 20:33:28 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[hi flipstar, i have a little problem to enable ... (andreasjacobs)]]></title>
		<description><![CDATA[hi flipstar,
i have a little problem to enable telned on my nas(1000) i followed the advices you gave in the howto but there is no connection to the box.mayby you can give me a little or a exaxt manual. by the way i try to connect with the command-line in windows with the command telnet ip. mayby this is the problem.
it would be nice if you write a little email(german) back to me.
thanks a lot

boostar]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_39</link>
		<pubDate>Wed, 04 Jul 2007 12:45:43 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hi guys, many many thanks guys for what you ... (Andrew Martin)]]></title>
		<description><![CDATA[Hi guys, many many thanks guys for what you are doing here, i get no help from raidsonic in the uk but i need help, I am desperately stuck trying to install the tinky.
I get into the boot loader using windows.
i type x then 2,to use tftp server
i type the IP address of the  server (my laptop) 192.168.2.100,
then i am asked for the file, I type in this box, c:\temp\tinky\tinky-2_3_2-mu-02.2 then press enter.

from the TFTP server in the tftp client tab this is what i have entered:

current directry =c:\temp\tinky
server interface = 192.168.2.100
host =192.168.2.71
local file =c:\temp\tinky\tinky-2_3_2-mu-02.2
block size default
i then hit put button and wait and wait
then the telnet session times out with message no data recieved.:+(
please can anyone help!!, i realise it is something i'm doing wrong. one other question i followed Keimix's walk through and unzipped the file and then added the .zip extension and extracted several files, but i can only point to one file, are the other files needed or do they automatically append to the 8 meg file ?
]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_36</link>
		<pubDate>Tue, 29 May 2007 18:44:52 GMT</pubDate>
	</item>
	<item>
		<title><![CDATA[Hi Flip, I've just installed tinky-2_3_2-mu-02.2 on my NAS-2000 ... (Matthias)]]></title>
		<description><![CDATA[Hi Flip,
I've just installed tinky-2_3_2-mu-02.2 on my NAS-2000 - great stuff, many thanks for your work. Now I'm playing a little with cryptoloop. Unfortunately I can't get it playing. I tried to create an encrypted container file exactly as described in your HOWTO. Everything seems to be fine (losetup, mke2fs, mount, ..create some files there.., umount, losetup -d). But trying to remount fails. I made a losetup with the same parameters/passphrase as entered before, but mount fails with an 'Invalid argument' error (guess there is no valid filesystem seen over the loop device anymore). Might the cryptoengine be broken in my nas box or is there probably an issue with the losetup?]]></description>
		<link>http://flipstar.net/myfaq/index.php?action=open#openq_34</link>
		<pubDate>Thu, 17 May 2007 20:28:22 GMT</pubDate>
	</item>
</channel>
</rss>